SydsEastside Now Sharing Photos at flickr.com/motorcars/

Syd's Eastside has joined up with flickr and setup a small photo stream sharing resource at http://www.flickr.com/motorcars/.

Since the practice of showing off our used cars and trucks catalog online requires that we take some photographs of the vehicles, we have decided that instead of Copyrighting these photos and then keeping them all to ourselves, we will share them with the world. At first we were looking for our own web application to do this from one of our own websites, but preliminary trials on some of the applications available showed that most of the freeware and registered shareware open source software applications that are supposed to perform these duties are purely incapable of doing so. Almost every application we installed failed miserably (even the registered shareware we paid for a license for).

In our hunt for a manageable online photo album application, we found flickr.com, and so far it is offering us the most reliability. However, we are continuing to investigate other possible web application solutions that we can host ourselves so that we can utilize our photography to more fully promote our brands.

Although we are currently only just getting started at flickr, which is currently a Yahoo! property, I think I was able to upload a nice little assortment of cars that we have had listed for sale in our Used Autos: Cars & Trucks For Sale section of the website.

While we are still looking for a more configurable solution that we can control more fully as a web application on one of our online properties, it certainly is good to have this option available from flickr. Unfortunately, flickr.com also stifles its user creativity by limiting its membership to only 3 sets (albums) of photos each. This drastically limits the free membership's ability to categorize photos accurately. I suppose they have to do something to get members to the paid membership program, though.

I'm not sure if it will work here, but one nice feature of flickr is the ability to easily create a slideshow of your photos that you can share from your other websites. Let's see if Google will support it...



It appears to work, although I am seeing an error from the Adobe FlashPlayer 9. Perhaps there is some incompatibility issues here on the Blogger pages? For now, I'll just leave it up. If anyone has a fix for this, be sure to let me know, I would appreciate it. If the error gets too anoying I'll just put it on some other page and point a link on the blog to where I put it. ;)

Thanks!

-Syd's Eastside

How to Clean Your ABS Wheel Sensor

Does your ABS light come on consistently and you do not know what is wrong! Well, when you check your code, you may see that it says that your front wheel sensor is damaged. However, that is not always the case. A lot of times, your ABS wheel sensor is just fine; they just need to be cleaned. Of course, if you take it to a shop, they are going to tell you that you need a new one. So we are going to go over how you can clean your own ABS wheel sensor in your Toyota and save yourself a lot of money. After you clean it, if you are still having the problem, you will need a new one. However, most people have noted that nine times out of ten, this does indeed fix their problem.

First of all, before you get started, you are going to want to make sure you have everything that you need to perform the job. The only things that you are really going to need are a ratchet, jack, wheel lock and, of course, a rag or paper towel to clean it off with. After you have all of this stuff, you can feel free to get started. This should only take you an hour or two to do yourself......


Getting Started On Your Wheel Sensor

First, you have to choose which side you want to get started on. You can choose either the passenger side or the driver side; it does not really matter. However, whichever side you do choose, that is the side that you, of course, need to jack up first. Before you jack up the car, you need to turn the steering wheel to the opposite side that you are working on. For example, if you are working on the driver side, then you are going to want to turn the wheel to the passenger side. Also, when you get it jacked up. You should use a jack stand, not just the jack. You never know how long you will need to have this car jacked up, so you will want the jack stand.

After you turn the wheel and get everything all set up, you will notice that you should be able to locate the ABS wheel sensor very easily. It should be located directly mounted to the knuckle. To take this off, you are going to have to remove the two bolts that are holding them in place. In most Toyota cars, they are 10mm bolts. However, some of them can change from time to time. Overall, there will be about four bolts you have to take out. To do this, just follow the ABS sensor around so that you can remove all of the bolts. When you get the sensor off, you will notice that it is all covered in dirt. Take your rag or paper towel, and start whipping it off. As you do, you will notice that the very middle of it has a sliver strip that you could not see before. A lot of times, dirt blocks this and can cause problems, as you found out. After cleaning it, simply reverse the steps you did to reinstall it. Also, be sure to check both of the front ABS sensors. The one on both sides of the car!

Still Having Problems

Most of the time the procedure discussed above will fix any problem that you are having with your ABS sensor. If you have cleaned both of the front sensors and there are still problems, then you do have a damaged ABS sensor. At this point, you need to get new ones and replace them. If you want, you will be able to install them the same way you cleaned the other ones. However, instead of cleaning the old ones and putting them back on, you can simply put on the new ones. Overall, this is a one day job that can save you a ton of money. Most people do not notice how much money that they can save by doing this themselves until they actually do it!

Featured Links:

+ Dummy Health Guide for Malaysian
+ Dating and Relationship Blog
+ Malaysia Real Estate Blog
+ GeekMalaya - Malaysia Computer and Technology Blog

Mantius Cazaubon is a successful author and publisher of Toyota Parts Buyers Guide, A resource which includes information on Discount Auto Parts and DIY Auto Repair

Bumper Repair is Easy!

Why are you putting off auto body repairs on your vehicle? You really don't have to since auto body repairs can be affordable and time efficient. One repair that is easily completed on your vehicle is bumper repair. Bumper repair is an easy repair and will not cost you too much out of your wallet. Many car owners don't realize that bumpers can even be repaired; they think that damaged bumper must be replaced. However, that is not true and bumper repair is easy!

If your vehicle bumper is damaged, you really need to get it repaired. First of all, I am sure that it doesn't look to great on your vehicle. It will be hurting the appearance of your vehicle and also decreasing the resale value of your vehicle at the same time. Also your bumpers job is to protect your vehicle from damage and you and your passengers from injury. If your bumper is damaged it is weak and will most likely not be able to do its job as well.

The reason many car owners don't know that bumper repair can be completed is because bumper could not always be repaired. Bumpers used to be made of metal which is not easy to repair. However bumpers are now covered with a plastic material in hopes that if there is any minor damage to the bumper it can be easily repaired. This saves car owners a lot of money versus getting bumpers replaced.

There are a lot of bumper damages because many people feel it is ok to love tap your vehicle while parking. Most accidents in occur in parking lots or parking garages, which leads to the rear and front bumper being affected the most. This is usually minor damage that can be repaired.

So, if you need bumper repair you can get it completed at most auto reconditioning shops. Auto reconditioning shops usually offer a variety of services to get your vehicle looking great. You will want to check around before choosing which auto body shop is best for your vehicle and your wallet. Most repairs can be completed in a short time, which means you will not need to get a rental car, which therefore means you will save more money. Some shops will also offer mobile repair for bumper repair. They will come to you wherever you need them to whether it is work, home, the gym or anywhere else which can really save you some time! Which is a value thing to all of us.

You should also know that getting your bumper repaired can help you do your part in taking care of your environment. By getting your bumper repaired you are saving waste from going to the landfills and polluting our environment. It is all part of the go green act!

So stop putting of bumper repair for your vehicle. Bumper repair is affordable, fast and will get your vehicle looking good. Find an auto reconditioning shop to complete bumper repair on your vehicle; bumper repair is easy!

Featured Links:

+ Dummy Health Guide for Malaysian
+ Dating and Relationship Blog
+ Malaysia Real Estate Blog
+ GeekMalaya - Malaysia Computer and Technology Blog

If your car is in need of auto reconditioning start looking for a qualified professional to handle your concerns. Look for an auto body professional to take care of your ride from bumper repairs to fixing the major auto body repairs